Parts are designed towards to manufacturing purpose, and the functional unit can be used on industrial products. If you plan to 3d print these parts, we cannot ensure the mechanism will work well, because it is not designed for 3d printing.
The whole mechanism can be used as a functional unit. When you rotate the “Drive Gear” or the “Ring” , the blades in the center hole open or close gradually. It is similar to a camera aperture or iris diaphragm. A motor can be used to drive the mechanism.
The “Drive Gear”(Part D20.003TY2) is optional. You can use any gear as driving gear as long as its gear teeth’s parameter is the same to the table in the drawing.
If you want to know more about the mechanism, read this article: https://www.tanerxun.com/mechanical-shutter-design-plan/.html
Reviews
There are no reviews yet.